Collaborating remotely for King Motorsports from Oregon has its pros and cons. On the downside, I don't get out to Wisconsin to see the shop, cars and staff as often as I'd like to. But on the upside, I get to experience the car culture of the Pacific Northwest, with its own unique blend of Mugen-inspired vehicles. And there a few unicorns I have yet to see in person.

Last weekend I set the alarm for 5am and hit the road by 6am for the three hour drive to Hondafest NW at Pacific Raceways just southeast of Seattle. Hondafest NW is an annual Honda and Acura car show put on by NW Motiv. This year there would also be drag races and autocross.

Pacific Raceways has a 2.25-mile road course, drag strip, and plenty of asphalt for autocross crafting. Somehow this entire facility is hidden away by Washington's treescape, and it reminds me of visiting Trees of Mystery. Except there are a gazillion Hondas in line trying to get in.

This line of Honda and Acuras of all ages and levels of polish are 3 wide and maybe a half mile long, but is thankfully moving along.

The roll-in is a glorious chorus of enthusiastic revving, the kind you only do when you are with your own kind and in the middle of the woods with nobody to complain. Mostly we have raspy tenors but there is the occasional baritone and bass. The smell of fuel reminds me of the Dyno Day roll-in at King Motorsports-- my favorite part of the event.

I glance at my fuel meter a few times. We've all been in line about 30 minutes, maybe more? In the lane next to me a maroon Civic sedan starts to ooze white smoke out of the hood just after the passengers offload a custom lowrider adult tricycle off the roof.

Having somewhat misjudged my bathroom breaks, I start glancing around for a porta-john, considering if I should give up my place in line, pull over, and take a break. Just then I catch a glimpse of bright blue in my rearview mirror, about 20 cars back-- Bill Master's EP3 was maneuvering into the special entrance reserved for show cars. Following closely were Mel Diego's white EP3 and Huy Hoang's red DC5. It was then I knew it would be a good show. The long drive here would definitely be worth it.

A few minutes later, I had paid and was turning into the VIP parking area. Helpful event staff guided us on exactly where to park, and that seemed to help keep things organized. I parked my black EP3 next to a nicely sorted black RSX, loaded up my backpack, grabbed my camera and headed for the show car corral by way of the restrooms.



The show cars were a really interesting mix. Quite a good mix of RSX, Integra and Civics. There was a healthy showing of Accord and Prelude, plus a few old school CRX and very early gen Civic hatchbacks. Someone brought their Odyssey, and I even found a very clean CRV. There were a few NSX there too.



The variety is what I love about one-make car meets. Normally a dude with a chopped-up Del Sol wouldn’t consider shining up his car to show at an event for fear of getting the stink eye. But show up to a Honda event with said Sol, and you are instantly family. Sure they may look at you like you are the oddball uncle, but you're still family and people are glad you showed up. Tell me more about how you turned this Honda into a bamboo-lined tropical cabana, Uncle Steve.





I run into Jerimiah Styles, who has just completed the installation of his Mugen aero kit on his white 2nd gen Integra. He’s showing his car and has recently swapped his bronze MF8s for time attack RNRs. His car is looking great and the King Motorsports sticker on his windshield nabs him a bonus +5 HP.



He introduces me to Mel and Bill, who have the only two EP3s in the show. Their builds are legends here in the Pacific Northwest. Mel generously gives me a tour of his white 2003 Civic Si hatch, something I’d been looking forward to. This car is so well-known that it’s usually the first image that comes up when you Google “EP3.” Mel is an old friend of King’s CEO Scott, having worked closely together to assemble Mel’s Mugen wish list.



Mel points out all his parts and describes each with care. He moves along swiftly from part to part, because there is just so much to show off. Full JDM front bumper conversion. Type-R headlights and side skirts, Mugen front lip and radiator duct, Mugen wing, Mugen seat rails, Mugen Twin Loop, Mugen hood, a custom-modified Mugen roll cage that is so well integrated with the OEM interior that it looks like the plastics had been molded exclusively for the cage. His Mugen grill is properly painted with a black background to add extra dimensionality. His CAI draws air from behind the driver side opening on his Mugen lip.





“It’s the details,” he says. And he’s right. Because I also own an EP3, I can process the walkaround at the speed the details are hitting my ears. And I can also appreciate how rare these parts are. I’ve only seen a few of these Mugen pieces on one other car, and that’s the Mugen EP3 in the King Motorsports showroom.





Mel describes the stages of his car’s evolution as “Chapters.” He’s on Chapter 2 now. Chapter 3 involves adding Mugen MF10 17x8, Mugen brakes and Mugen seats. “With some luck and the help of King Motorsports, that will be the final chapter,” he declares. Something tells there will still be an amazing Chapter 4.



Parked next to Mel is Bill’s turbocharged 2003 Civic Si, equally stunning in the dedication and hard work put into it. You can tell these two have influenced each other and made each other’s builds better. Bill also has many of the same Mugen parts and JDM upgrades, but his build still feels distinct. He points out that his paint is actually a remixed, brighter version of Honda’s already vibrant Vision Blue Pearl. Now that he points it out, I’ll never be happy with Honda’s blue again. His version really is so much better.







Having followed Bill on Instagram I’ve seen that his day job is a woodworking magician, creating the HGTV-worthy kitchen and home remodels. That same craft and precision finds its way into his EP. My friend Julio points out the custom bracing for the motor mounts and the custom re-routed AC lines. They were so well done I didn’t even notice them. Overall there is a strong sense of restraint with Bill’s EP build. It feels curated, like he methodically chose only the best of the best parts and mods, the ones that would still be impressive and relevant decades later.



Parked next to Bill is Huy’s turbocharged 2003 RSX Type-S – aka REDRUM1. This car has all the shine of a Mugen show car fused with the raw functionality of a gutted and purpose-built race car. It sits right on the elusive line between show car and race car. Huy treats me to a guided walkaround, and I am floored. I find it hard to comprehend the amount of time, skill and resources that went into this vehicle.

Huy has an elusive perfect balance of finances + skill + taste that produces something masterful. If you only have finances + skill, you might go overboard on the mods. If you only have skill + taste, you probably restore a car to its original glory. If you have finances + taste, you go buy an NSX. But if you have all three – you build the DC5 elevated to what must be its perfect functional and aesthetic balance.













Like the artist he is, Huy tells me the build started with one thing – the desire to fit a specific set of wheels. To do that, he had the fenders masterfully pulled out and the whole car widened. Everything else flows from there. There is a reason Super Street called it “one of the best Honda builds to date!”



Huy brought two other cars with him, a white Mugen-equipped DC5 and a gorgeous green EK hatch. He tells me that the Autoart Mugen DC5 1:18 die-cast model was his inspiration for his white DC5, and I can see the similarities. It hits me that he’s actually creating big-scale, functional model kits, which in turn are replica of full scale cars. It is life imitating art imitating life. This loop produces impressive refinement in Huy’s hands.

Iron Sharpens Iron

It’s no coincidence that Mel, Bill and Huy are parked next to each other. They are friends outside the car show too, parking their beloved rides in each other’s home garages from time to time. These three friends have sharpened and pushed each other to create functional works of art.

**

More info:

Mel Diego’s 2003 Honda Civic Si
Instagram: @hur1cne@hov
http://www.superstreetonline.com/features/htup-1108-2003-honda-civic-si/

Bill Master’s 2003 Honda Civic Si
Instagram: @siborg_ep
http://www.superstreetonline.com/features/htup-1301-2003-honda-civic-si/

Huy Hoang’s 2003 Acura RSX Type-S
Instagram: @wiiizzer
http://www.superstreetonline.com/features/1510-turbocharged-mugen-2003-acura-rsx-type-s/

Full set of photos from Hondafest NW:
https://www.facebook.com/media/set/?set=a.10153475333141319.1073741856.110076751318&type=1&hc_location=ufi

For many of us who drive an EP3, we are proud to say that it's the King Motorsports example that inspired us to own and build one up in the first place. Debuted at SEMA 2003, this is the EP3 that more than a decade later still inspires EP3 builds all over the world. This 7th gen Civic was built by King Motorsports for American Honda.





The Nighthawk Black Pearl EP3 was based on the US-spec model and fitted with top shelf performance and body parts that showed what was possible to create from the relatively egg-shaped, minivan outline of the stock 02-05 Civic Si. In order to fit the Mugen front lip, the USDM bumper cover and rebar were replaced with JDM spec versions, which create more of a snub-nose effect in the front. The bumper was finished off with a carbon fiber radiator duct. The stock grille was replaced with a Mugen grille with JDM red badge and driver-side flared opening to allow for additional cooling to reach the Mugen air box. The iconic Mugen hood includes functioning engine bay ventilation.



The rear USDM bumper was also replaced with a shortened JDM version that allowed for the fitment of the Type-R rear lower valence. Type-R side skirts complete the lower body parts. An Mugen adjustable wing was modified for the USDM hatch and pulls out the body line in just the right places.

The changes on the pure performance side were even more significant. A DC5R motor, 6-speed transmission, Mugen ECU, the legendary Mugen twin loop exhaust... the build list goes on and on and is just incredible. It's no wonder the car has appeared in the pages of Car & Driver, Road & Track, Boost and was featured on Speed TV.

Here is the "press release" for the car:

Using Honda performance specialist Mugen's vast array of aftermarket high-performance parts, King Motorsports (the sole authorized North American distributor for Mugen Co., Ltd) has created the ultimate street performance Civic Si that maximizes the potential throughout every corner of the vehicle. Making its world debut at SEMA, the King Motorsports/Mugen Civic Si has a K20 DC5R engine and 6-speed transmission with a limited slip differential. The modified engine produces 240-horsepower.

Powertrain Modifications:
Japan Domestic Market (JDM) K20A DC5R engine
JDM DC5R six-speed close ratio transmission with limited slip
Mugen cold airbox
JDM DC5R exhaust manifold and down pipe
Mugen stainless steel twin-loop cat-back exhaust
Mugen ECU
Mugen low temp thermostat
Mugen hi-pressure radiator cap
Mugen reserve tank covers

Suspension Modifications:
Mugen N-1 coil-over adjustable suspension
Mugen 25mm rear stabilizer bar
JDM Civic Type-R front stabilizer bar
5 lug conversion with RSX Type-S brakes front and rear
Mugen Micro Mesh brake line set
Mugen MF-10 forged wheels 17x8 +45 bronze
Bridgestone S0-3 225/45 ZR 17 Tires
Rear adjustable upper control arms

Exterior Modifications:
JDM Civic Type-R front and rear bumpers
JDM Civic Type-R side skirt kit
JDM Civic Type-R rear bumper valance
Mugen carbon fiber aero hood
Mugen front spoiler
Mugen sport grill kit
Mugen carbon fiber radiator duct kit
Mugen adjustable rear wing

Interior Modifications:
Prototype Mugen digital guage cluster mounted in carbon fiber inset
Mugen S-1 bucket seat with Mugen seat rail kits
Mugen Sports Pedal Set
Mugen Race II steering wheel with Mugen hub adapter


If you are ever in Wisconsin, stop by the King Motorsports facility to see the EP3 in the showroom! Here are a few pics I took of it in summer 2010-- the EP3 is getting a quick detail and wax the day before Dyno Day 2010.

** Visit the King Motorsports online store for performance and aero parts for the 02-05 Civic Si (EP3) **

We recently found this very cool comparison in our archives. These are the dimensions of the EP3 Civic Type-R ('01 Spec) vs EK9 Civic Type-R ('98 Spec).

Here is the full image:

The numbers:

Dimension - EP3 - EK9 - Difference

Overall Length - 4,135mm - 4,180mm - EP3 is 45mm shorter than EK9

Overall Width - 1,695mm - 1,695mm - same

Overall Height - 1,430mm - 1,360mm - EP3 is 70mm taller than EK9

Wheelbase - 2,570mm - 2,620mm - EP3 is 50mm shorter than EK9

Front Track - 1,470mm - 1,480mm - EP3 is 10mm shorter than EK9

Rear Track - 1,470mm - 1,480mm - EP3 is 10mm shorter than EK9

This past Labor Day we gathered a few EP3 Civics together for a Pacific Northwest mini-meet.

Seven EP3 owners from the Portland and Tacoma/Seattle areas met in Castle Rock, WA for grub. Bellies full of pizza, we headed up WA-504 for the 52 mile trip to the Johnston Ridge Observatory overlooking Mt. St. Helens.

Those of us with gray hair will remember Mt. St. Helens as the active stratovolcano that blew its top in May of 1980. The eruption scorched 230 square miles of forest and was the deadliest and most economically destructive volcanic event in all of US history. 30 years later, Mt. St. Helens looks downright other-worldly; it's clear something massive, dangerous and powerful happened here. The landscape just looks wrong -- yet it makes a natural sense all its own. It is rare to see so much landscape changed in such a short time.

If I was a better writer I would make some kind of deeply insightful comparison linking the shifting modifications of this landscape to the changes we've seen to our own EP3s over the years. Or to the reputation of the EP3s, or of Honda... but I'll spare you!

The Tacoma/Seattle guys roll up to our meeting point in Castle Rock. Julio leads the way, followed by Rick. John in the silver EP had intentionally popped the hood latch to give his motor a bit more cool air.

This is the 52-mile route we took from Castle Rock to the Johnston Ridge Observatory overlooking Mt. St. Helens.

We made up a nice caravan of seven as we headed up the hill. Here is a great shot Dave somehow took out of his sunroof, while driving. He managed to get all seven of us in one shot!

Dave led up the pack in his Taffeta White Si, setting a good pace on his Buddy Club N+ coilovers and black-coated RSX rims. His HKS exhaust roars ahead on the road that will take us up the mountain past shaded valleys, expansive bridges and wide-open, forested vistas.

Behind him was John -- an OG EP owner in a Satin Silver Metallic sleeper he's owned since it had 25 miles on the odometer. He hasn't stopped driving it since. On the way to today's meet he clicks over to 214,000 miles. John has the rare privilege to pick between an EP3 and an Apex Blue Pearl S2000 Club Racer (CR) in his garage -- and tells us that of all the dozen or so Hondas he's owned, he will never be able to part ways with his EP3. He just loves it too much.

Next was Todd, a Portlander who has quietly modded his white EP for years and has only recently been meeting up with other EP owners. He's a lurker on the forums that we finally got to come out and play. I met him when I purchased his Mr. Alex front strut bar from him in a Target parking lot last year. He's holding his own as we dive into the corners.

Behind him was Julio, driving our most modified EP of the day. Julio's ride has a custom metallic purple (root beer) paint job with genuine Mugen lip & grille on a JDM front end -- and a swapped motor. Actually I'm not sure how many motors he's had in this car. Maybe Julio has lost count too. His car has seen generous iterations of motors, suspensions, aero ... and survived an ordeal involving a turbo setup gone wrong. It's awesome to see that he stuck it out and has kept on modding.

Behind him is Brian, driving a Nighthawk Black Pearl EP on bronze 16" Konig rims with a Greddy exhaust. Springs drop it to an aggressive height. The car itself actually belongs to Dave's twin brother Andy (Yep, twin brothers with modded EP3s. That's how we do it in the PNW). The car is on loan for the day to Brian, who normally drives an S2000. Today he's driving Andy's EP so the car can join us for the drive, even if its owner couldn't.

Nearing the end of the caravan is Rick, with a white EP on bronze wheels with Mugen Sport Suspension. He's sporting a Volvo lip that looks amazing on his front bumper, giving it a nice chin that means business. A small German flag swings from his rear view mirror, a signal of his Bavarian lineage.

Bringing up the rear is me, in my black EP. I'm lamenting having left my Buddy Club suspension set on the softer side, but enjoying this chance to stretch my hatch's legs in a pack like this. It's a fun challenge to be the caboose in a seven-car line. I didn't realize just how much more information I would have to process, since I had a clear view of most of the caravan; Just as the leaders might be speeding up, others might be slowing down in a turn. Some might be tapping brakes to adjust following speed. My solution was to just hang back, to not follow too closely. It was like being the tail on an undulating Slinky, stretching and compressing in waves. I'd say I had one of the best views of the group -- not only did I get to enjoy the amazing scenery but also got to see all these clean EPs winding up these beautiful roads.

In a total coincidence, we actually passed a bone-stock, black EP3 headed the other direction. The driver didn't seem to know he had just passed seven of his biggest fans. Clearly not a fellow enthusiast!

Here we are at a scenic lookout point mid-way up the mountain. Mt. St. Helens is in the background.

Sportin' the license plate frame of champions!

John's EP3, rocking the OEM 15" stockies and experimental plasti-dipped lower chin:

Reaching the observatory, we are treated to this alien landscape transformed by the dome-less Mt. St. Helens. Dave says the mountain lost 1000 feet of height in the eruption. The earth is already starting to push up a new mound in the crater that will one day be a new peak.

As the sun begins to set, we line our cars up for a final photo opp.

Below from left to right: Julio, Perry, Andy.

Below from left to right: Rick, Todd, Dave.

The parking lot for the observatory is massive. Our cars are lined up at the far end of the lot.

A closer look... can you spot the Prius in this lineup? Just kidding!

We decide to let the sun go down so it wouldn't blind us on the drive back.

The 2002-2005 Honda Civic Si hatchback never quite lived up to its overseas, beloved Type-R brothers. Out of the box it looked a bit like an egg, or perhaps a squat version of the Odyssey minivan. Pre-facelift, the car had tiny 15" rims. Despite these quirks, the EP3 provides ample opportunity for customization and dramatic improvements. The Recaro-made OEM seats, rally-style dash-mounted shifter and torque-blessed K-series are still a killer package that is hard to leave behind once you've driven an EP3. This last Stateside Si hatchback has just turned eleven years old and is being discovered and enjoyed by a new generation of Honda enthusiasts.

I'm looking forward to what the next decade of changes will bring for our EPs!

Photo credits: Dave O. and Perry W.

** Build Lists **

Dave's EP3
2004 Taffeta White
185,300 miles, owned since 2009
BuddyClub N+ suspension
HKS Hi-Power exhaust
DC Sports shorty header
BuddyClub Short Shifter
Tanabe strut bar
Neuspeed lower x-brace
HFP wing
Seibon CF hood
RSX wheels coated black - Dunlop Z1 Star Spec

Todd's EP3
2002 Taffeta White
87,000 miles, owned since 2003
AEM V2 intake
DC Sports shorty header
JP Performance mid-pipe
Neuspeed short shifter
Metal shifter bushings
15” Kosei K1s powder coated black
Bridgestone Potenzas RE960 205/60/15
Eibach Pro-kit
JDM rear sway bar with Energy Suspension bushings
HFP wing
DIY black headlight housings
Red/Black carbon fiber dash kit

Julio's EP3 (this is just a partial list!)
2004 Honda Rootbeer Metallic
84,200 miles, owned since 2006
K24A4
Hasport I/M Adapter Plate
Hondata I/M Gasket
RSX-S Injectors
K-Pro
DC Sport Shorty
HKS Hi-Power exhaust
C/F Spark Plug Cover and I/M Cover
Corsport Aluminum Shifter Cable Bushings
Corsports Aluminum Shifter Base Bushings
J's Racing Engine Torque Dampener
Buddy Club Short Shifter
JDM 04-05 Projectors w/ 8K HID kit
JDM 04-05 Taillights
JDM Front Bumper
Authentic 04-05 Mugen Lip
Authentic 04-05 Mugen Grille
ARC EK9 Splitters
JDM Rear Bumper and Lip
Benen Rear Tow Hook
Burnt Titanium Mugen Emblems
C/F Mugen Replica Hood
C/F Hatch
C/F Mugen Replica Wing
C/F Spoon Replica Mirrors
OEM Hood Bra
JDM Rear Rebar Mod
EDM DC2 Rear Foglight
Work Emotions CR-KAI (17x7)
Toyo Proxes 4 (205-40-17)
H&R 2" Lowering Springs
KYB Shocks
Corsport C-Pillar Bar
Corsport Rear Strut Bar
Corsport Adjustable Sway Bar Links
Omni Rear LCA's
Hardrace RCA's
Beaks Lower Tie Bar
DC-5 Rear Sway Bar
EM2 Front Sway Bar

Andy's EP3
2003 Nighthawk Black Pearl
92,500 miles, owned since 2006
Tokiko Blues with Neuspeed springs
Greddy EVO 2 exhaust
Injen short ram air intake
DC Sports Titanium strut bar
Neuspeed lower x-brace
HFP wing
HFP Side skirts
Fiber Images CF hood
Konig Helium wheels - Dunlop DZ101

Rick's EP3
2002 Taffeta White
130,000 miles, owned since 2008
17" Rota Tarmac II
Mugen Showa Sports Suspension
04-05 OEM side skirts
OEM JDM Type-R window visors
OEM hood bra (recently stolen but being replaced)
Custom catback exhaust
Short ram intake
OEM JDM RSX side markers (wired into parking lights)
HFP wing
Volvo front valance retrofit front lip

Perry's EP3
2002 Nighthawk Black Pearl
52,000 miles, original owner
BuddyClub N+ suspension
5-lug conversion (from 2003 RSX Type-S)
Mugen MF-10 17x7.5
AEM V2 intake
Greddy EVO 2 exhaust
Seats from JDM Integra Type-R DC5
EDM Type-R headlights with Morimoto projectors
Mugen grill
Replica carbon fiber Mugen wing
Carbon fiber front lip spoiler (Type-R style)
HFP rear lip

** Visit the King Motorsports store for parts for the EP3, including genuine Mugen bits **

** This was sent in by Perry W... Thanks Perry! **

Gotta send a big thanks to Scott and the guys at King for their help picking out new rims for my 2002 Civic Si hatchback (EP3).

Because the 02-03 model Si has a 4x100 bolt pattern, wheel options are limited. Scott pointed me to Volk and Enkei -- but ultimately I had my heart set on the rarity and heritage of the forged Mugen rims.

My ideal Mugen rim (for my bolt pattern) was long out of stock: the Mugen MF-8. Those would have been awesome. But just as ideal would be the MF-8's big brother: the Mugen MF-10 (10 spokes instead of 8, with a deeper "webbing" where the spokes converge around the center). King has limited number of these -- in stock and on sale -- so I snatched a set up.

But there was a catch. In order to mount these beautiful new rims, I would have to convert my Si from a 4-lug bolt pattern to a 5-lug bolt pattern (the MF-10s are a 5x114 bolt pattern). More on this later.

First let's talk about these magestic MF-10s.

The set of MF-10s arrived a few days later from King: 16"x7" +43, in bronze, complete with valve stems and black center caps. They look terrific and have a semi-machined lip that reminds me of the fine workmanship that goes into the Mugen shift knobs. The spokes of the MF-10 have a matte texture that offset the lip. These rims are a work of art and perfection. You can fall into a JDM-induced trance staring into the rich bronze color.  I love these rims so much I even recorded The World's First Mugen MF-10 Unboxing Video for YouTube.

I couldn't wait to get these on my car. But I would have to. I had to do that 5-lug conversion, all by myself. In my garage. I live roughly 2000 miles from King's shop. So driving out there wasn't an option. I don't really trust any of the shops out here yet. So it was up to me.

At this point I should stop to say that I have absolutely ZERO experience with suspensions. I think I might have rotated tires once. The most technical thing I ever did to the exterior was install side skirts, a wing, a short-ram air intake. Easy stuff.

I kept replaying the two comments Scott had given me:

The encouraging: "Just do a 5-lug conversion. It's not that bad."

Then the more ominous: "There's definitely a lot involved for the conversion. It's not for the faint of heart."

So I started by planning. I bought myself a shop manual, read every forum thread I could find about the 5-lug swap. I bought a bunch of tools, a breaker bar, fluids, ball joint puller etc. I was stocking up and studying nearly every night!

The 5-lug came from a donor car in Tennessee -- a 2003 RSX Type-S (DC5). The DC5 shares many of the same parts as my EP3, so the swap is possible and has been done by many EP3 owners. Because the donor car was a Type-S (not the base model), I had the benefit of getting much larger front calipers & rotors as a bonus. But that bonus was offset by the need for new axles (to fit the larger Type-S splines).

Here's a picture of the donor RSX parts before they were shipped to me:

Assembling all my tools and parts took about 3 weeks. Lots of mail order, and help from Big Mike and Jude. Jude's advice was something about using beer and copious amounts of swearing. That turned out to be good advice.

The actual install happened over 2 weeks, nights and weekends... I lost half a week when I realized the ball joint puller I had purchased was inadequate for the job. And had to hire a mobile mechanic to help me with a stuck axle (lesson learned: get a "BFH," bigger floor jack, bigger jack stands).

Picture of the work in progress. You can see the original 4-lug assemblies still on the car. On the floor is the new 5-lug, a fresh socket set, and an old rim (bronze C8).

A picture of the stock EP3 front rotor next to the larger RSX Type-S replacement:

New replacement axles from an RSX Type-S:

My tires are dismounted from my C8's and re-mounted to the MF-10 set! The de-throned old rims shrink back in shame.

Conversion is complete now, and my shiny MF-10s finally mounted on the car. Look closely to see my smiling face in the reflections!!